The implement has lashing points for slings.
WARNING
Risk of accidents due to improperly
attached lifting gear
If the lifting gear is not attached at suitable
positions, the machine or components can
be damaged during loading and endanger
safety.
Only attach the lifting gear at the marked
positions.
Use slings with a tensile strength of at
least 1000 kg per sling.
CMS-I-00004148
Improperly attached lifting gear in the fertiliser
hopper.
CMS-I-00004146
REQUIREMENTS
Implement is in transport position
1. Only attach the lifting gear at the marked
positions.
2. Hang the slings on the crane with a crossbeam.
3. Load the machine with a crane.
CMS-I-000089
10 | Transporting the machine
Loading the implement with a crane
MG6660-EN-II | D.1 | 27.09.2021
235
To Next Page
Loading...
Need help?
General
