ASTRO VA-1842 - Original Command Setting

94
4.2.14 Original Command Setting
You can create an original CEC command here and then send the command with CEC Send.
The display method is as follows.
Mouse operation
Right-click → left-click ANALYZE → left-click Original Command Setting
Unit operation
Press the ANALYZE key.
→ press L CLICK over Original
Command Setting
Press R CLICK → press L CLICK over ANALYZE
The items that can be set are as follows.
Item
Description
OP CODE
OP code to send
Data Length
Volume of data to send
Data
Data to send (displays only the number set in Data Length)