Chapter 6 Compliance Test
6.4.3 HDCP1.4 CTS 1B
When a test ID number is clicked with the mouse, the selected test is started. While testing is in progress, the
settings required for the tests are set automatically. The following shows the test list.
Test list
Regular procedure: With Repeater
Performs a check of the HDCP protocol for when a
repeater is connected to the DUT.
Regular procedure: With Repeater
Performs a check of the HDCP protocol for when a
repeater is connected to the DUT.
Regular procedure: HDCP_HPD after
reading R0’
Performs a check of the HDCP protocol for when an
invalid R0’ is returned.
Irregular procedure: (Second part of
authentication) Timeout of KSV list
READY
Performs a check of the HDCP protocol for when a
timeout occurred for reading the KSV list.
Irregular procedure: (Second part of
authentication) Verify V’
Performs a check of the HDCP protocol for when an
invalid V’ is returned.
Irregular procedure: (Second part of
authentication) Verify V’
Performs a check of the HDCP protocol for when an
invalid V’ is returned.
Irregular procedure: (Second part of
authentication)
MAX_DEVS_EXCEEDED
Performs a check of the HDCP protocol for when
READY is sent with MAX_DEVS_EXCEEDED=1.