7.4 EDID (Load File)
Open the window shown in 7.1.2 Load, and load only the EDIDs of the stored configuration data.
* If you have a VA-1809, the DDC files or EDI files of the VA1809 can also be loaded.
In other cases, the data is loaded in binary format.
7.5 Load Downstream EDID
Load the downstream EDIDs.
7.6 CEC Config
7.6.1 Address Setting
Acquire the logical address.
For the setting items and details, refer to 4.2.7 Address Setting.
7.6.2 Support OP Code
Select the supported OP codes.
For the setting items and details, refer to 4.2.8 Support OP Cod.
7.6.3 Support Language
Select the supported languages.
For the setting items and details, refer to 4.2.9 Support Language.
7.6.4 Support Tuner
Select the supported tuners.
For the setting items and details, refer to 4.2.10 Support Tuner.
7.6.5 Support Timer
Select supported timers.
For the setting items and details, refer to 4.2.11 Support Timer.
7.6.6 Response Setting
Set the settings for the responses for received data.
For the setting items and details, refer to 4.2.13 Response Setting.
7.6.7 Original Command Setting
Set an original CEC command.
For the setting items and details, refer to 4.2.14 Original Command Setting.
To Next Page
Loading...