ASTRO VA-1842 - General Control Packet

Chapter 4 Source ANALYSIS
47
4.1.12 General Control Packet
Decodes and displays General Control Packet of the HDMI input.
The display method is as follows.
Mouse operation
Right-click → left-click ANALYZE → left-click General Control Packet
Unit operation
Press the ANALYZE key.
→ press L CLICK over General
Control Packet
Press R CLICK → press L CLICK over ANALYZE
Also, you can switch between HEX and GUI display by right-clicking over the window and then clicking HEX<-
>GUI.
The General Control Packet display items when GUI display are as follows.
Displayed item
Description
Status Change
Presence or absence of changing after pressing "Clear"
SET_AVMUTE
ON
OFF
Clear_AVMUTE
ON
OFF
Color Depth
Color Depth not indicated
8bit
10bit
12bit
16bit
Packing Phase
Phase 4
Phase 1
Phase 2
Phase 3
Default_Phase
0 or 1