Chapter 4 Source ANALYSIS
4.1.14 Audio Timing
Displays the constants (N and CTS) used when playing back the HDMI input audio clock from the video pixel
clock and the input HDMI audio volume level.
The display method is as follows.
Right-click → left-click ANALYZE → left-click Audio Timing
→ press L CLICK over Audio Timing
Press R CLICK → press L CLICK over ANALYZE
The Audio Timing display items when GUI display are as follows.
Indication (DEC) of each register value
Volume of each channel (This can be switched between dB display (figure
on left above) and value display (figure on right above) in Sub Window of
Audio Timing of Sub Window.)
To Next Page
Loading...