ASTRO VA-1842 - SCDC Status

56
4.1.17 SCDC Status
Displays the SCDC status on the HDMI receiver side.
The display method is as follows.
Mouse operation
Right-click → left-click ANALYZE → left-click SCDC Status
Unit operation
Press the ANALYZE key.
→ press L CLICK over SCDC Status
Press R CLICK → press L CLICK over ANALYZE
Also, you can switch between HEX and GUI display by right-clicking over the window and then clicking HEX<-
>GUI.
The SCDC display items when GUI display are as follows.
Displayed item
Description
SCDC Disable
Sets an acknowledgment to not be returned in response to SCDC access.
Sink Version
XX H
Source Version
XX H
TMDS_Bit_Clock_Ratio
Ratio is 1/10 or ratio is 1/40
Scrambling_Enable
Disable / Enable
Scrambling_Status
Disable / Enable
RR_Enable
Disable / Enable.
Ch2_Locked
No longer exists / Successfully
Ch1_Locked
No longer exists / Successfully
Ch0_Locked
No longer exists / Successfully
Clock_Detected
No longer exists / Successfully