Built-in LCD Monitor and Speakers
Each of 8-bit, 10-bit, and 12-bit HDMI video can be easily checked with the front LCD monitor.
Linear PCM audio can be easily checked with the built-in speakers.
Program Function
Enables the data used when virtualizing monitors to be managed by programs.
This function allows you to easily change to the performance of various monitors by simply calling
programs.
There is also a function to pick out and group just the programs to be used from among many
programs.
Registration to USB Flash Memory Device
ANALYZE (measurement) data, programs, unit settings, and other data can be saved to the USB
flash memory device.
Hot Plugging Function
Enables a reset to be applied to a transmitter without disconnecting and connecting a cable between
the transmitter and VA-1842.
Log Trigger Function
Enables setting a trigger to retrieve ANALYZE data.
Line Monitor Function
Enables sending and receiving commands with the DDC and CEC lines.
HDMI Version 2.0 Compatible
Supports the timing and InfoFrame of HDMI 2.0.
To Next Page