ASTRO VA-1842 - Page 231

Chapter 6 Compliance Test
215
11.2.7-8
Check that the DUT is in the playback state.
Send <Play> [Play Still].
Enters the stopped state.
11.2.7-9
Check that the DUT is in the idle state.
Send <Play> [Play Still].
Enters the stopped state or sends <Feature
Abort>.
11.2.7-10
Check that the DUT is in the idle state.
Send <Play> [Fast Forward Min Speed].
Send <Play> [Fast Forward Medium Speed].
Send <Play> [Fast Forward Max Speed].
Send <Play> [Fast Reverse Min Speed].
Send <Play> [Fast Reverse Medium Speed].
Send <Play> [Fast Reverse Max Speed].
Send <Play> [Slow Forward Min Speed].
Send <Play> [Slow Forward Medium Speed].
Send <Play> [Slow Forward Max Speed].
Send <Play> [Slow Reverse Min Speed].
Send <Play> [Slow Reverse Medium Speed].
Send <Play> [Slow Reverse Max Speed].
Sends <Image View On> or <Text View On>.
Also sends <Feature Abort>.
11.2.7-11
Check that the DUT is in the playback state.
Send <Play> [Fast Forward Min Speed].
Send <Play> [Fast Forward Medium Speed].
Send <Play> [Fast Forward Max Speed].
Send <Play> [Fast Reverse Min Speed].
Send <Play> [Fast Reverse Medium Speed].
Send <Play> [Fast Reverse Max Speed].
Send <Play> [Slow Forward Min Speed].
Send <Play> [Slow Forward Medium Speed].
Send <Play> [Slow Forward Max Speed].
Send <Play> [Slow Reverse Min Speed].
Send <Play> [Slow Reverse Medium Speed].
Send <Play> [Slow Reverse Max Speed].
Operates at the sent speed.
11.2.7-12
Change the logical address to 0, 1, 3, 4, and 5, and
perform the following procedure.
Check that the DUT is in the idle state.
Send <Play> [Play Forward].
Starts playback.
11.2.7-13
Check that the DUT is in the idle state.
Send <Play> [Play Forward] from logical address 15.
Ignores the message.