AudioCodes MP-20x - Page 268

MP-20x Telephone Adapter 268 Document #: LTRT-50609
User's Manual
Feature Details
 Configuration file encryption (3DES)
 SIP-triggered remote firmware and configuration upgrade
 Command-Line Interface (CLI) over Telnet
 Dual image management
 SNMP
5
Packetization
 RTP/RTCP Packetization (RFC 3550, RFC 3551)
 DTMF Relay (RFC 2833)
Security
 HTTPS for Web-based configuration
 Password protected Web pages (MD5)
Telephony Signaling
 In-band:
9 DTMF: Detection and Generation, TIA464B
9 Caller ID: Telcordia, ETSI, NTT - Type I, Telcordia Type II
9 Call Progress Tones
 Out-of-band:
9 FXS Loop-start Signaling
9 On/Off Hook, Flash Hook
Wireless LAN
6
 Wireless LAN - 802.11b/g Wireless Access Point
 Wireless Security:
9 RADIUS Server (802.1x/WPA Client Authentication)
9 WPA
9 WPA2
9 WPA/WEP Mixed Mode
9 TKIP Encryption
9 MAC Filtering

 Operating frequency: 2.4 - 2.5 GHz
 Nominal data transfer rate:
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b: 1, 2, 5.5, 11 Mbps
9 Operating channels:
- 11 for North America
- 14 for Japan
- 13 for Europe (ETSI)
Hardware
Power
+12 VDC, 1A External Power Supply Adaptor, 110/220 VAC/50-60 Hz,
available in the following models:
 MP202A-PS-NR-EU/RPSD10007: Power Supply 12VDC/1A Wall
Mount EU Type 220VAC; DC Plug 5.5 x 2.5 x 8 mm Straight; 1.5 m
cable with Ferrite bead
 MP202A-PS-NR-US/RPSD10008: Power Supply 12VDC/1A Wall
Mount US Type 110VAC; DC Plug 5.5 x 2.5 x 8 mm Straight; 1.5 m
cable with Ferrite bead
 MP202A-PS-WR-US/RPSD10012: Power Supply 12VDC/1A Wall
Mount US Type 100-240VAC; DC Plug 5.5 x 2.5 x 8 mm Straight;
5
Not supported by MP-202C-A.
6
MP-202C-W model only.