Version 3.0.1 269 July 2010
MP-20x Telephone Adapter 17. Software and Hardware Specifications
Feature Details
1.5m cable with Ferrite bead
MP20x-PS-WR-UK/RPSD10011: Power Supply 12VDC/1A Wall
Mount UK Type 100-240VAC; DC Plug 5.5 x 2.5 x 8 mm Straight;
1.5m cable with Ferrite bead
MP202A-PS-WR-ARG/RPSD10014: Power Supply 12VDC/1A Wall
Mount ARG Type 100-240VAC; DC Plug 5.5 x 2.5 x 8 mm Straight;
1.5 m cable with Ferrite bead; Argentina
MP202A-PS-WR-ARG-2m/RPSD10016: Power Supply 12VDC/1A
Wall Mount ARG Type 100-240VAC; DC Plug 5.5 x 2.5 x 8 mm
Straight; 2 m cable with Ferrite bead; Argentina
Interfaces
WAN 10/100Base-T (RJ-45)
LAN 10/100Base-T (RJ-45)
RJ-11 FXS ports for telephones (POTS)
Network Interface WAN/LAN 10/100 Base-T(RJ-45), 1 (MP-202C-A)
or 4 (MP-202C-R/W) LAN 10/100 Base-T (RJ-45)
Two antenna connectors - 802.11b/g WiFi antenna (MP-202C-W)
LED Indications
LAN activity on Ethernet Port
WAN
Power on
FXS Phone lines (1 to 4, depending on MP-20x model) - Registered,
In Use, Alert
WiFi enabled (Only MP-202C-W model)
SLIC characteristics
Maximum Ringer Load (REN) = 5
Short Haul
Ringer Voltage - up to 65Vrms
Configurable Terminating Impedance
Environmental
Operating Temperature: 0 to 40°C
Storage Temperature: -25 to 70°C
Operating Humidity: 10 to 90% non-condensing
Storage Humidity: 10 to 90% non-condensing
Weight and Dimensions
MP-202C-A: 223 g; 167.2 x 134 x 33.3 mm
MP-202C-R: 249 g; 167.2 x 134 x 33.3 mm
MP-202C-W: 263 g; 167.2 x 153 x 33.3 mm
MP-202B: 257 g; 167 x 133 x 33 mm
To Next Page
Loading...
