7. Advanced
The selected check box is checked and the guide is displayed (vertical and horizontal grey scale bars)
Image 7-133
How to set the hierarchy level ?
1. Push ↓or ↑ to select the hierarchy level slider box
The item is focused
Image 7-134
2. Use the ← and → to select the level (from 1 to 6)
How to adjust the soft edge ?
1. Press Adjust
An Edit dialog box is disp
layed and the left side soft edge zone is selected. The default level is level 1.
2. Use the ← and → to select a point within the same level and side to be displaced
Note: The ↑ and ↓ can be used to switch to another level or to another side of the image.
3. Press ENTER to go to the Edit mode
4. Use the ↑ and ↓ arrows to select the desired field
5. Press ENTER to edit the field
The edit field is put in the edit mode
R59770066 SIM 7Q SERIES 07/10/2013
169
To Next Page
Loading...
