7. Advanced
6. Use the arrows or the digits to fill in the desired x position of the selected point (in this case the left top point of level 1)
7. Press ENTER to confirm
The selected point is displaced to the new position (x=100 ; Y=0).
8. Press BACK to exit
A dialog box is displayed. Press ENTER to confirm
All the points of the higher levels (level 2, ...) are altered by this adjustment. The points that belong to the
same level (level 1) remain in the same position (anchors).
170 R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
