7. Advanced
Image 7-174
How to perform the GLD correction?
1. Use the arrows to select the Hierarchy level and confirm by pressing ENTER
Image 7-175
Warning: To perform GLD correction, you must st
art at Hierarchy level 1, then go to level 2, then level 3 to end at level 4 .
2. Highlight Adjust and confirm by pressing Enter to open the alignment user interface
Image 7-176
3. In the alignment user interface, highlight the edit box in the Level section.
4. Use the arrows ← or → to select the range to be adjusted
Warning: To perform GLD correction, you mus t start at the lowest range and go though all ranges to end with the highest range.
212
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
