7. Advanced
5. In case of external patterns, make sure that the correct test pattern is active
Warning: This external pattern must meet the s elected gray range (see the edit box in the Le vel section) and it must take into
account the correct gamma setting. See App endix B.
6. Use the arrows ↑ or ↓ to select the color of which the intensity need to be changed
7. Use the arrows ← or → to adjust the intensity of the selected color or enter a new value in the corresponding edit box
8. In the Level section, move to the next range and repeat steps 5 to 7
9. Repeat this procedure for all remaining Hierarchy levels (2, then 3, ending with 4)until all the intermediate grays are matched
How to reset the gray levels?
1. In the Gray Level Definition user interface, highlight Reset
Image 7-177
2. Press Enter
R59770066 SIM 7Q SERIES 07/10/2013
213
To Next Page
Loading...
