Bernina 990 - Page 16

My BERNINA
2 Introduction 16
Accessories Purpose
Touchscreen Pen
For precise operation of the
touchscreen.
Spool Cap D12
Secures the thread spool in place
and allows it to unwind
consistently while sewing.
Spool Cap D27
Secures the thread spool in place
and allows it to unwind
consistently while sewing.
Spool Cap D43
Secures the thread spool in place
and allows it to unwind
consistently while sewing.
4× Foam Pad
The foam pad prevents the thread
from slipping, tangling or
breaking on the spool pin.
Spool Stabilizer
To support large spools on the
vertical spool holder.
To avoid vibrations from the
spool.
Accessories Purpose
Thread Spool Net
To regulate threads that unwind
too quickly from the spool, e.g.
nylon, rayon, silk or metallics.
5× Bobbin for B9/
BERNINA Hook
To wind the bobbin thread.
Straight and
CutWork Stitch
Plate with Sensor
For straight stitch and embroidery
projects.
For CutWork and CrystalWork
projects.
5.5mm BSR Stitch
Plate with Sensor
For sewing with the BERNINA
Integrated Stitch Regulator (BISR).
Height Compen-
sation Tool
To level an angled position of the
presser foot sole when sewing
over thick seams.