Bernina 990 - 2.2.2 Included Presser Feet

My BERNINA
2 Introduction 18
Included Presser Feet
Presser Foot Purpose
Reverse Pattern
Foot#1C
For practical and decorative
stitches. To sew forward and in
reverse.
For materials such as corduroy,
denim or wool.
Reverse Pattern
Foot#1D
For practical and decorative
stitches. To sew forward and in
reverse.
For materials such as corduroy,
denim or wool.
Use only with the BERNINA Dual
Feed.
Overlock Foot#2A
For visible seams on stretch
fabrics.
For overlock and neatening
seams.
Buttonhole Foot
with Slide#3A
For automatic buttonholes with a
maximum length of 30mm, with
or without cord.
Buttonhole
Foot#3C
For the sewing of manual and
stitch counted buttonholes, with
or without a filler cord.
For gathering using thread or
elastic thread (smocking).
Presser Foot Purpose
Zipper Foot#4D
For sewing in zippers, topstitching
next to raised seams.
For sewing on braids, piping and
hook and loop fastener.
Use only with the BERNINA Dual
Feed.
Blindstitch Foot#5
For sewing blindstitch hems,
edgestitching and topstitching on
either side of the foot.
Button Sew-On
Foot#18
For attaching buttons and hooks.
Open Embroidery
Foot#20C
For decorative sewing applications
and stitch patterns.
Sideways-Motion
Foot#40C
For sewing Sideways Motion
patterns and stitches in various
directions.