Bernina 990 - 3.15.4 Presser Foot Selection; 3.15.5 Presser Foot Pressure

My BERNINA
3 Set Up the machine 41
1. Attach the BSR Presser Foot.
1
2
2. Insert the cable of the presser foot into the BSR
connection.
3. Unlock sewing functions and screen.
ð The BSR Mode function is switched on and
the BSR Settings are displayed.
Presser Foot Selection
Sewing
►
Presser Foot
1 42 3
1Selected Presser Foot 2Search 3Recommended
4Presser Foot Overview
Presser Foot Selection in the Status Bar recommends
the appropriate Presser Foot based on the currently
selected stitch pattern or embroidery design.
The presser feet compatible with the machine are
displayed in the Presser Foot Overview section.
Recommended presser feet are marked with the
Recommended
icon.
In order for the machine to check the compatibility of
the stitch, presser foot, needle and stitch plate, you
must select the attached presser foot in the Presser
Foot Overview section. The selected presser foot is
shown in the Selected Presser Foot section and in the
Status Bar.
If the stitch pattern or the embroidery design is not
compatible with the selected presser foot, this can lead
to collisions - an error message will appear, the stitch in
the stitch preview is shown in red and the machine
does not start.
Search
With the Search
function, you can search for the
attached presser foot by entering the presser foot
number.
Recommended
With the Recommended
function, you can filter
the overview by recommended presser feet.
Presser Foot Pressure
Sewing
►
Presser Foot Pressure
The presser foot pressure has a default setting for
working with medium fabrics. When working with
thick fabrics, a reduced presser foot pressure enables
the fabric to be moved more easily beneath the presser
foot. When working with thin fabrics, a higher presser
foot pressure prevents the fabric from slipping easily.
We recommend testing the setting before you start. If
the fabric moves with some resistance, you can reduce
the presser foot pressure. If the fabric slips easily
beneath the presser foot, you can increase the presser
foot pressure.
Help on finding the optimum presser foot pressure for
various fabric types and sewing techniques can be
found in Consultant in the Help Center. [}see page24]