Bernina 990 - File Manager

Embroidery
11 Embroidery Screen 81
Laser
The Laser
icon shows the status of the laser.
n White: Laser off.
n Yellow: Laser on.
By tapping the icon, you can switch the laser on and
off.
The laser indicates the next stitch point in sewing mode
and the exact needle position in embroidery mode.
Depending on the presser foot and needle position, the
entry point may be concealed by the presser foot. To
avoid the deflection of the laser with transparent
presser feet, you can lower the presser foot before the
sewing start, e.g. with the Knee Lifter.
11.2 Layer Bar
1
2
3
4
1Add Design 2Embroidery Design Layers
3Embroidery Designs Combined 4Selection Options
In the layer bar, the individually added embroidery
designs or elements of an embroidery design are
displayed as layers. The most recently added
embroidery design is shown at the top. The lowest
layer shows all added embroidery designs combined.
The order of the layers affects the embroidery.
The following functions are available in the layer bar:
n Add Design
: Add embroidery designs from the
File Manager. [}see page83]
n Selection Options
: You can select a single
layer, multiple layers or all layers for editing. [}see
page21]
n Change the order of the layers by moving them or
delete layers by dragging them out. [}see page20]
11.3 File Manager
In the File Manager, you can load and manage
embroidery designs. The File Manager is shown when
the Add Design
function is tapped in the layer bar.
1
2
3
4
1Toolbar 2Navigation Bar 3Quick Access Bar
4Selection Area
Toolbar
In the toolbar, you will find functions for searching for
files, adjusting the view and managing your own files in
your Personal Folder and on a USB stick.
Search
With the Search
function, you can search for
embroidery designs by name in the currently selected
folder.
Selection
With the Selection
function, you can select folders
or files that you wish to manage using a function from
the Options
menu.
The Selection
function is only available for the
Personal Folder
and USB Stick folders.
Options
With the Options
menu, you can manage the
selected file(s) or folder(s) using the Selection
function.
n Rename: Renaming a File or Folder. [}see
page23]
n Cut: Cut File(s) or Folder(s). [}see page23]
n Copy: Copy File(s) or Folder(s). [}see page23]
n Paste: Paste cut or copied File(s) or Folder(s). [}see
page23]
n New Folder: Create New Folder.
n Information: Show preview and further infor-
mation on the stitch pattern.
n Select All: Select all displayed File(s) and Folder(s).
n Delete: Delete File(s) or Folder(s). [}see page23]