Bernina 990 - 6.4.1 Tips; 6.4.2 Length; 6.5 Darning Program; 6.5.1 Darning Length

Sewing
6 Prepare and Edit Stitch Pattern 67
Tips
Sewing
►
Edit
►
Tapering Options
►
Tips
With the Tips function, you can adjust the tips of
the tapering stitches. You can choose from 4
predefined tips 1–4 and use the Adjust
Manually
function to adjust the lateral position
and the angle of the selected tip.
Tip
Sewing
►
Edit
►
Tapering Options
►
Tips
►
Adjust Manually
With the Tip setting, you can move the tips of the
tapering stitches to the side from the far left to the far
right.
Angle
Sewing
►
Edit
►
Tapering Options
►
Tips
►
Adjust Manually
With the Angle setting, you can adjust the angle of the
tips between 0° and 90°.
Length
Sewing
►
Edit
►
Tapering Options
►
Length
With the Length function, you can adjust the
overall length of stitch pattern. The following functions
are available:
n Record mm
n Adjust Length
n Sew Manually
Record mm
Sewing
►
Edit
►
Tapering Options
►
Length
►
Record mm
With the Record mm function, you can sew the
desired length and save it with the Reverse
button.
Additional tapering stitches with this stitch pattern are
sewn at the same length. The setting remains saved
until it is overwritten, cleared or the machine is
switched off.
Adjust Length
Sewing
►
Edit
►
Tapering Options
►
Length
►
Adjust Length
With the Adjust Length function, you can adjust
the desired overall length im mm. The machine
automatically sews the tapering stitch.
Sew Manually
Sewing
►
Edit
►
Tapering Options
►
Length
►
Sew Manually
With the Sew Manually function, you can sew the
middle section freely for each tapering stitch. The
machine sews the first tip and automatically switches to
the middle section. As soon as you press the
Reverse
button, the machine sews the second tip.
The sewn length is not saved.
6.5 Darning Program
The darning program No.23 allows you to set the
darning length. As soon as the darning program is
loaded, the Darning Options submenu appears in the
editing menu.
n Darning Length
: Program the darning length.
Darning Length
Sewing
►
Edit
►
Darning Options
►
Darning
Length
The following functions are available for adjusting the
darning length:
n Record mm
: Program the darning length in
mm. [}see page68]
n Auto Length
: Set the auto darning length.
[}see page68]