Bernina 990 - 3.19.5.2 Securing; 3.19.5.3 Presser Foot Up;Down; 3.19.5.4 Thread Cutter; 3.19.5.5 Quick Reverse

My BERNINA
3 Set Up the machine 46
Securing Stitches
When the Securing
function is switched on, you
can use the Securing Stitches
function, to select
how securing stitches are sewn. The following
functions are available:
n Secure in Place: Securing Stitches in Place.
n Running Stitches: Running Stitches.
Running Stitches
If you have selected the Running Stitches
setting,
you can set the count of securing stitches.
Cut Upper and Lower Thread
With the Cut Upper and Lower Thread
function,
you can switch the thread cut on and off.
Raise Presser Foot
With the Raise Presser Foot
function, you can
switch the raising of the presser foot on and off.
You can combine the Securing
, Cut Upper and
Lower Thread
and Raise Presser Foot
functions.
Securing
Settings
►
Sewing
►
External Buttons
►
Securing
With the Securing function, you can set which
function is carried out when the Securing
button
is pressed. The following functions are available:
n Secure in Place: Securing Stitches in Place.
n Running Stitches: Running Stitches.
If you have selected the Running Stitches
setting,
you can set the count of securing stitches.
Presser Foot Up/Down
Settings
►
Sewing
►
External Buttons
►
Presser
Foot Up/Down
With the Presser Foot Up/Down function, you can set
the height to which the presser foot is raised when the
Presser Foot Up/Down
button is pressed.
Depending on the material thickness, you can raise the
presser foot to 0–7mm.
Thread Cutter
Settings
►
Sewing
►
External Buttons
►
Thread
Cutter
With the Thread Cutter function, you can determine
whether securing stitches are sewn when the Thread
Cutter
button is pressed. The following functions
are available:
Securing
With the Securing
function, you can switch the
sewing of securing stitches on and off.
Securing Stitches
When the Securing
function is switched on, you
can use the Securing Stitches
function, to select
how securing stitches are sewn. The following
functions are available:
n Secure in Place: Securing Stitches in Place.
n Running Stitches: Running Stitches.
Running Stitches
If you have selected the Running Stitches
setting,
you can set the count of securing stitches.
Quick Reverse
Settings
►
Sewing
►
External Buttons
►
Quick
Reverse
With the Quick Reverse function, you can set how the
machine sews in reverse when the Quick Reverse
button is pressed. The following functions are available:
n Reverse: Machine sews backward.
n Backstep: The machine sews the stitch pattern
backwards stitch by stitch according to the stitches
sewn. This setting is particularly suitable for
decorative stitches.
Foot Control
Settings
►
Sewing
►
Foot Control
The default setting Needle Up/Down is set for the
back kick on the foot control. You can switch the
standard function off and on or switch on and set a
combination of the following functions:
Securing
With the Securing
function, you can switch the
sewing of securing stitches on and off.