Application Label Types
Rev A 151 BBP
®
35/37 User’s Manual
12. Touch the Optional Comment: field and enter additional comments to display on the pipe
marker label, if desired.
13. When ready, touch Next .
You can add up to four graphics to the pipe marker label. The available graphics are divided
into categories. To change to another category:
14. Touch Change Category .
15. Under Categories, touch the up/down arrows to view more categories in the list.
16. Touch the desired category to select it, then touch OK .
17. On the Graphics screen, touch the left or right double arrows to scroll
throught the list of available graphics.
18. Touch the desired graphic in the list.
19. Repeat the above two steps to add another graphic.
20. When ready, touch Next .
To Next Page
Loading...
