BT Micro - Page 137

BT Micro Owner’s Manual
137
Enter the IP address of the PC and the MAC address .See
Page 203 for instructions on finding the MAC address.
Note
The screen to input the IP and MAC addresses are part of the
Router Configuration. You will notice that the Router
Configuration is highlighted on the left-hand screen. When the IP
and MAC address are entered please select ‘Firewall’ from the
left-hand side menu and select the Interface again.
The Firewall Interface updates to show the Host as assigned: -
Select ‘Add Application’.
Select the application from the drop down list and ‘Apply’