BT Micro Owner’s Manual
169
Paging
To protect featurephones against Announcements and Voice
Calls
By default, all featurephones may be paged. You can page-
protect each featurephone to prevent it from being paged from
either Announcements or Voice Calls.
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select
‘Extensions’.
Select ‘Page protection’
Select the extensions you wish to protect. A is displayed
beside protected extensions.
Press the Hands-free Key to finish programming.
Outgoing VoIP Calls
In normal operation to make an outgoing call a line access
code, 9 or 8, is dialled or a Line key is selected and the digits
are dialled. To make a call over an IP line the digit 8 must be
dialled or an IP Line key selected.
This feature is used to programme the BT Micro so that
outgoing calls are sent over the IP Lines independently of the
line access code dialled or the line selected. It is also possible
to select particular calls to go over IP lines.
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘Lines’
Select ‘Outgoing VoIP Calls’
Four options are displayed
- Normal Line selection
- All O/G Calls on VoIP
- Selected Calls on VoIP
- LCR
Normal line selection
This is the normal mode of operation where calls are made on a
standard line by dialling 9 and on a VoIP line by dialling 9.
All O/G calls on VoIP
When this option is selected all Outgoing calls will be sent over
a VoIP line. If you want calls to be dialled over a standard line if
the IP lines are busy then select ‘Fallback to PSTN Line’ which
is displayed when ‘All O/G calls on VoIP’ is selected.
If you only want calls to be dialled over the IP lines and busy
tone to be returned if they are not available make sure that the
‘Fallback to PSTN line’ option is not selected.
Selected Calls on VoIP
You can choose that particular calls be carried over the IP line.
For example you may want all international calls to
automatically select an IP line but all other calls to go over the
Line selected.
To Next Page
Loading...
Need help?
General