BT Micro Owner’s Manual 
54 
a)  Enter an internal number if you want to divert all 
your calls to another extension. 
b)  Enter 9 followed by an external number if you want 
to divert calls to an external number. A 
programming option is available to allow both 
internal and external calls (or external calls only) to 
be diverted externally. 
3.  Select ’Confirm’ to accept the number. 
To set a 'Divert on Busy' from a standard phone the code is 
'733' followed by the destination number. 
 
WARNING 
It is possible that an extension may misuse the External Divert 
facility. The default setting is that no extension is allowed to set 
the facility. 
 
 
Note 
 
When ‘Divert On Busy’ is enabled on an extension to divert to an 
external number, external incoming calls will divert but internal 
calls will not. 
Diverting an external call to an external number ties up two 
exchange lines.  Such calls are called trunk-to-trunk calls. 
To cancel a Divert on Busy diversion 
1.  From the Idle Menu, select ‘Extension Divert’. 
2.  Select ‘Divert when busy’.  The diversion is 
automatically cancelled and the display returns to the 
Idle Menu. 
To divert calls when your extension does not answer 
The ‘Divert On No Answer’ allows you to divert all your calls to 
ring at another extension if there is no answer at your extension 
after four rings.  Alternatively, you can divert all external calls to 
an external number if your extension has not answered after 
four rings.  In this case, internal calls will not be diverted but will 
continue to ring your extension. 
1.  From the Idle Menu, press the Scroll Down Key () 
until ‘Extension Divert’ is displayed. 
2.  Select ‘Divert on no answer’. 
a)  Enter an internal number if you want to divert all 
your calls to another extension. 
b)  Enter 8 followed by an external number if you want 
to divert external calls to an external number. 
3.  Press ’Confirm’ to accept the number. 
 
 
WARNING 
It is possible that an extension may misuse the external divert 
facility. The default setting is that no extension is allowed to set 
the facility. 
 
 
If ‘Divert On No Answer’ is enabled on an extension to divert to 
an external number, external incoming calls will divert, but internal