BT Micro Owner’s Manual
70
To change your extension Lock Password
From the Idle Menu, press the Scroll Down Key () until
‘Extension Lock’ is displayed.
Select ‘Extension Lock’.
Select ‘Change the lock code’.
Dial the existing 3-digit Lock Password. The default password
is 123.
Dial your new 3-digit Lock Password. The new Lock Password
will not be displayed when entered.
Press the Hands-free Key to finish programming.
From a standard telephone, the code is 714.
To examine Extension Lock Passwords
For configuration via the web interface, see page 105.
For configuration via the featurephone interface, see page 171.
Alarm call
This feature enables you to set your extension to ring at a given
time.
To set your extension to give you a Alarm call at a given time
From the Idle Menu, press the Scroll Down Key () until ‘Alarm
call’ is displayed.
Select ‘Alarm call’.
Enter the time in the 24-hour clock format, for example, 0930 for
9.30 am.
At the programmed time the extension will give ten rings. If not
answered, it will ring twice more at two-minute intervals and will
then cancel.
Alarm calls must be set daily and therefore cannot be set more
than 24hrs ahead.
To review and cancel a Alarm call
To review a Alarm call, select ‘Alarm call’ and the time set will
be displayed. Select ’Confirm’ to retain the programmed time.
If you wish to change the time, select ‘Change’ and enter a new
time.
To cancel the alarm call, select ‘Change’ followed by ’Confirm’.
From a standard telephone, the code 718 is used to set a Alarm
call, and the code 718* is used to cancel it. A standard
telephone cannot query the Alarm call time.
Extension Reset
You can reset your extension to cancel all the following features
if they have been set:
Do Not Disturb
Call Divert
Call Back
Display Messaging
Alarm call
To reset your featurephone
From the Idle Menu, press the Scroll Down Key () to scroll
downwards until ‘Reset the telephone’ is displayed.
Select ‘Reset the telephone’. The display shows ‘Extension
reset’ momentarily before returning to the Idle Menu.
If you are using a standard telephone, dial 739 and wait for the
acknowledgement tone (internal dial tone).
To Next Page
Loading...
Need help?
General