BUS feeds the direct output signal to
the mix minus bus. The output of the mix
minus bus feeds back into the channel
(or group) where the channel’s signal is
subtracted. The MIX MINUS button then
feeds the resulting signal to the direct
output.
dIRECT OUTPUT ANd MIx MINUS
Therefore, every channel can produce
a mix minus output which is a mix of all
the channels routed to the bus apart
from itself. MIX MINUS and BUS are
independent buttons, so the track routing
selector and the direct output can be fed
with the mix minus bus, even if the channel
is not feeding the bus.
All surround channels and groups have
surround direct outputs with the option to
downmix the output to stereo instead (on
the User-Chan screen). The mix-minus of a
surround direct output is a true mix-minus
of the whole surround channel or group.
To Next Page
Loading...
