In addition, the MASTER button operates
all the TB buttons preselected by the
MASTER PRESEL button.
The GAIN control sets the level of the TB
Mic. 2 rotary controls set the level of 2
RTB (Reverse Talkback) signals. Each RTB
signal can feed a separate loudspeaker.
There can also be a mix of both signals to
feed a single loudspeaker. This can mix
with the PFL feed.
TALkbACk
Talkback is available to direct outputs using
the buttons on the fader modules and
Input/Output panel.
Talkback is available to individual tracks
using the button in the track routing
section.
Talkback inputs are patched using the
OPTIONS - MON TB TONE - Talkback and
Tone screen.
All Talkback buttons are subject to On-Air
inhibits, set up using condition switching
(TX-REH screen).