Canon LBP3310 - Printer Sharing Settings

4-38
Setting Up the Printing Environment
Printing from a Network Computer by Sharing the Printer on a Network
4
Printer Sharing Settings
Printer sharing settings vary depending on your operating system. See the
following setting procedure according to your operating system.
• For Windows 2000/XP/Server 2003/Vista (32-bit) (See p. 4-38)
• For Windows Vista (64-bit) (See p. 4-42)
NOTE
If you are not sure whether you are using 32-bit Windows Vista or 64-bit Windows Vista,
see "Checking the Processor Version of Windows Vista," on p. 10-8.
■ For Windows 2000/XP/Server 2003/Vista (32-bit)
NOTE
For Windows XP, the printer cannot be shared on a network at the default settings (the
settings immediately after the installation).
Printer sharing settings require running [Network Setup Wizard] to enable the sharing
settings.
For more details, see Windows Help.
1 Display the [Printers and Faxes] folder or the [Printers] folder.
From the [Start] menu, select [Settings] ➞ [Printers].
From the [Start] menu, select [Printers and Faxes].
From the [Start] menu, select [Control Panel], and then click [Printers and Other Hardware]
➞ [Printers and Faxes].
From the [Start] menu, select [Control Panel], and then click [Printer].
Windows 2000
Windows XP Professional Windows Server 2003
Windows XP Home Edition
Windows Vista