Canon LBP3310 - Ready Indicator

9-29
Installing the Optional Accessories
9
Network Board
8 Insert the network board into the expansion slot.
Hold the metal panel portions of the network board and insert the board straight
while aligning it with the guide rails inside the expansion slot.
IMPORTANT
• Do not touch the network board parts, printed circuits, or connectors with your
hands.
• Insert the network board securely.
9 Secure the top and bottom portions of the network board with
the two screws supplied with the network board.
10 Connect the power cord to the printer.
11 Plug the power plug into the AC power outlet.
12 Turn the printer ON, then wait until the (Ready) indicator
comes on.
13 Turn the printer OFF.
14 Disconnect the power plug from the AC power outlet.
15 Remove the power cord from the printer.