Canon LBP3310 - [Remote UI] (Only if the Network Board Is Installed); [Refresh]; [Resolve Error]

5-38
Basic Usage of the Printer
5
Printer Status Window
[Remote UI] (Only If the Network Board Is Installed)
Select [Remote UI] from the [Options] menu to start the Remote UI. The Remote UI
is software that allows you to manage the printer using a web browser. For details
on the Remote UI, see "Remote UI Guide".
IMPORTANT
You cannot select [Remote UI] if the printer and computer cannot communicate via a
network.
[Refresh]
Selecting [Refresh] from the [Options] menu obtains the latest printer status and
refreshes the Printer Status Window display.
You can obtain the same result by clicking [ ] (Refresh) in the Printer Status
Window.
[Resolve Error]
You can resume a job which is paused during printing for some reason by selecting
[Resolve Error] from the [Job] menu. However, the job resumed by selecting
[Resolve Error] may cause unexpected print results.
[Resolve Error] is disabled in any of the following cases.
•
When the job is paused due to a printer error such as a paper jam and paper-out
condition
•
When another user's job is paused
([Resolve Error] is enabled on the print server if the printer is shared on a
network.)
You can obtain the same result by clicking [ ] (Resolve Error) in the Printer
Status Window.
IMPORTANT
If the message <Insufficient Disk Space> is displayed in the Printer Status Window,
delete unnecessary files, and then select [Resolve Error].