Canon LBP3310 - Installing the Printer Driver from CD-ROM Setup

4-47
Setting Up the Printing Environment
4
Printing from a Network Computer by Sharing the Printer on a Network
NOTE
• If your print server is Windows 2000/XP/Server 2003/Vista (32-bit), you cannot download
and install the printer driver on 64-bit Windows Vista.
• The screenshots used in this section are from Windows XP Professional.
Installing the Printer Driver from CD-ROM Setup
1 Turn the computer on and start up Windows.
2 Log on as a user with administrator rights.
IMPORTANT
If you are not sure about the permissions, ask your computer administrator.
3 Insert the supplied "LBP3310 User Software" CD-ROM into
the CD-ROM drive.
If the CD-ROM is already in the drive, eject the disk and re-insert it into the drive.
IMPORTANT
• If you are using Windows Vista and the [AutoPlay] dialog box appears, click [Run
AUTORUN.EXE].
• If CD-ROM Setup does not appear, display it using the following procedures. (The
CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name
may differ depending on the computer you are using.)
- If you are using an operating system other than Windows Vista, select [Run] from
the [Start] menu, enter "D:\English\MInst.exe", and then click [OK].
- If you are using Windows Vista, enter "D:\English\MInst.exe" in [Start Search]
under the [Start] menu, and then press the [ENTER] key on your keyboard.
NOTE
If you are using Windows Vista and the [User Account Control] dialog box appears,
click [Allow].