6-51
Printing a Grayscale Sample
6
Using the Various Printing Functions
Printing a Grayscale Sample
You can print an adjusted grayscale sample. [Preview] is printed in the center of the
paper, and this is surrounded by images where [Brightness] and [Contrast] are
changed by 1 unit in each of the corresponding directions.
IMPORTANT
Make sure that [Spooling at Host] in the [Device Settings] sheet is set to [Auto] before
printing. (See "Confirming the Setting for [Spooling at Host]," on p. 10-9)
1
Select [Print] from the [File] menu in the application.
The [Print] dialog box is displayed.
NOTE
Printing procedures vary depending on the application you are using. For details on
the printing procedures, see the instruction manual supplied with the application.
2
Select the name of this printer, then click [Properties] or
[Preferences].
To Next Page
Loading...
