Canon LBP3310 - Cleaning the Outside of the Printer

7-21
Cleaning the Outside of the Printer
7
Routine Maintenance
Cleaning the Outside of the Printer
Periodically clean the outer surfaces and ventilation slots of the printer to maintain
the optimal printing quality. When cleaning the printer, be careful of the following
points in order to prevent electrical shocks or printer malfunctions.
WARNING
• When cleaning the printer, turn OFF the main power switch, and then unplug the
power plug. Failure to observe these steps may result in a fire or electrical
shock.
• Do not use alcohol, benzene, paint thinner, or other flammable substances. If
flammable substances come into contact with electrical parts inside the printer,
this may result in a fire or electrical shock.
IMPORTANT
• Do not use a cleaning agent other than water or a mild detergent diluted with water, as
this may deform or crack the plastic materials in the printer.
• When using a mild detergent, be sure to dilute it with water.
• Grease or oil does not have to be applied to this printer. Do not apply grease or oil.