8-54
Miscellaneous Problems
Tr oubleshooting
8
Miscellaneous Problems
NOTE
For details on problems on installing the optional network board, see "Chapter 4
Troubleshooting" in Network Guide.
LBP3310 does not function properly.
Cause 1 LBP3310 is not specified as the default printer.
Remedy Specify it as the default printer.
Cause 2 The printer driver is not installed properly.
Remedy See "Installation Problems," on p. 8-37.
Excessive time is required until the next job starts after finishing a job.
Cause The printer cools down the fixing unit so that the print quality is
maintained (Especially after paper with a narrower width is printed).
Remedy Please wait a moment. The printer cools down the fixing unit automatically.
When the printer finished cooling down the fixing unit, the printer begins
printing.
CD-ROM Setup does not appear automatically. (Windows Vista only)
Cause CD-ROM Setup is not specified to appear automatically.
Remedy Perform the following procedure.
1. From [Control Panel], click [Play CDs or other media automatically].
2. Select the [Use AutoPlay for all media and devices] check box.
3. Set [Software and games] to [Install or run program].
To Next Page
Loading...
