Chroma A620028 - Baudrate; Rs485 Addr

Manual Operation
3-83
3.3.8.4 BAUDRATE
The DC Power Supply supports remote operation through the RS232 interface. The RS232
baudrate must be set prior to remote operation.
1. Use the “ ”, “ ” keys to move the cursor to the BAUDRATE column as
shown in Figure 3-152.
Figure 3-152
2. Use the numeric keys -
4
or the “Rotary” ( ) knob to select BAUDRATE.
3. Press “ ” to confirm.
4. Press “ ” to return to the MAIN PAGE.
There are 5 settings for BAUDRATE: 9600/19200/38400/57600/115200.
3.3.8.5 RS485 ADDR
The DC Power Supply supports remote operation through the RS485 interface. The RS485
address must be set prior to remote operation.
1. Use the “ ”, “ ” keys to move the cursor to the RS485 ADDR column as
shown in Figure 3-153.
Figure 3-153
2. Use the numeric keys -
9
or the “Rotary” ( ) knob to set the address.
0
ENTER
EXIT
0