Chroma A620028 - Description of PROGRAM Settings

Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
4-2
[ PROGRAM ]
PROG NO.
= 1
RUN COUNT = 1
PROG CHAIN
= NO
CLEAR PROG
= NO
[ SEQUENCE ]
SEQ NO.
= 1
SEQ TYPE
= AUTO TIME = 0.000(S)
VOLTAGE
= 0.00V
V S. R. = 1.000(V/ms)
CURRENT
= 0.000A
I S. R.
= INF. (A/ms)
[ SEQUENCE ]
SEQ NO.
= 2
SEQ TYPE
= AUTO TIME = 0.000(S)
VOLTAGE
= 0.00V
V S. R. = 1.000(V/ms)
CURRENT
= 0.000A
I S. R.
= INF. (A/ms)
[ SEQUENCE ]
SEQ NO.
= 3
SEQ TYPE
= AUTO TIME = 0.000(S)
VOLTAGE
= 0.00V
V S. R. = 1.000(V/ms)
CURRENT
= 0.000A
I S. R.
= INF. (A/ms)
[ SEQUENCE ]
SEQ NO.
= 4
SEQ TYPE
= AUTO TIME = 0.000(S)
VOLTAGE
= 0.00V
V S. R. = 1.000(V/ms)
CURRENT
= 0.000A
I S. R.
= INF. (A/ms)
↓
↓
↓
EXT._TRIG PULL = HIGH
Figure 4-2
4.1.1 Description of PROGRAM Settings
A PROGGRAM has 5 settings: (1) EXT._TRIG PULL, (2) PROG NO., (3) RUN COUNT, (4)
PROG CHAIN and (5) CLEAR PROG.