Chroma A620028 - SAS Subsystem

Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
5-46
5.6.2.8 SAS Subsystem
1. SAS:VOC
Description: Sets the VOC in SAS Mode.
Syntax: SAS:VOC <NRf+>
Example: Change the VOC to 600.0 V.
SAS:VOC 600
Query Syntax: SAS:VOC ?
Return Parameter: <NRf+>
Query Example: SAS:VOC ?
Return Example: 6.000000e+02
2. SAS:ISC
Description: Sets the ISC in SAS Mode.
Syntax: SAS:ISC <NRf+>
Example: Change the ISC to 8.0 A.
SAS:ISC 8
Query Syntax: SAS:ISC ?
Return Parameter: <NRf+>
Query Example: SAS:ISC ?
Return Example: 8.000000e+00
3. SAS:VMPp
Description: Sets the VMPp in SAS Mode.
Syntax: SAS:VMPp <NRf+>
Example: Change the VMPp to 500.0 V.
SAS:VMPp 500
Query Syntax: SAS:VMPp ?
Return Parameter: <NRf+>
Query Example: SAS:VMPp ?
Return Example: 5.000000e+02
4. SAS:IMPp
Description: Sets the IMPp in SAS Mode.
Syntax: SAS:IMPp <NRf+>
Example: Change the IMPp to 5.0 A.
SAS:IMPp 5
Query Syntax: SAS:IMPp ?
Return Parameter: <NRf+>
Query Example: SAS:IMPp ?
Return Example: 5.000000e+00
Note
Due to a formula limitation, the following conditions must be followed when
running in SAS mode:






×>
<
<
≠≠≠≠
ISC
IMP
-1 VOC VMP
ISC IMP , VOC VMP
0
IMP ,0 VMP ,0
ISC ,0 VOC
5. TRIG
Description: Updates the output waveform when SAS Mode is running.
Syntax: TRIG