Chroma A620028 - Page 215

Remote Operation
5-45
14. IVCurve:CONFigure:FILTer
Description: Sets the IV-Curve measurement signal cutoff frequency of the input
filter in Hz.
Syntax: IVCurve:CONFigure: FILTer <NR1>
Query Syntax: IVCurve:CONFigure: FILTer?
Return Parameter: <NR1>
Example: IVC:CONF:FILT 1000
(Sets the input filter cutoff frequency to1000Hz.)
Query Example: IVC:CONF:FILT?
Return Example: NR1
15. IVCurve:CONFigure:SPEed
Description: Sets the IV-Curve output response speed.
Syntax: IVCurve:CONFigure:SPEed
Parameter: SLOW | MIDDLE | FAST
Query Syntax: IVCurve:CONFigure:SPEed?
Return Parameter: SLOW | MIDDLE | FAST
Example: IVC:CONF:SPE FAST
(Sets the IV-Curve output response speed to FAST.)
Query Example: IVC:CONF:SPE FAST?
Return Example: SLOW | MIDDLE | FAST
16. IVCurve:CONFigure:MARGIN
Description: Sets the IV-Curve margin in %.
Syntax: IVCurve:CONFigure:MARGIN <NR1>
Query Syntax: IVCurve:CONFigure:MARGIN?
Return Parameter: <NR1>
Example: IVC:CONF:MARGIN 100
(Sets the IV-Curve margin to 100%.)
Query Example: IVC:CONF:MARGIN?
Return Example: <NR1>