Chroma A620028 - Page 211

Remote Operation
5-41
19. PROGram:MODE
Description: Sets the Program Mode for output.
Syntax: PROGram:Mode LIST
PROGram:Mode STEP
Parameter: LIST | STEP
Example: Changes the Program Mode to STEP Mode.
PROGram:Mode STEP
Query Syntax: PROGram:Mode?
Return Parameter: LIST | STEP
Query Example: PROG:MODE?
Return Example: STEP
20. PROGram:STEP:STARTV
Description: Sets the Step Mode start voltage for output.
Syntax: PROGram:STEP:STARTV <NRf+>
Example: Changes the start voltage of STEP Mode to 20.0 V.
PROGram:STEP:STARTV 20
Query Syntax: PROGram:STEP:STARTV?
Return Parameter: <NRf+>
Query Example: PROGram:STEP:STARTV?
Return Example: 2.000000e+01
21. PROGram:STEP:ENDV
Description: Sets the Step Mode output end voltage.
Syntax: PROGram:STEP:ENDV <NRf+>
Example: Changes the end voltage of STEP Mode to 50.0 V.
PROGram:STEP:ENDV 50
Query Syntax: PROGram:STEP:ENDV?
Return Parameter: <NRf+>
Query Example: PROGram:STEP:ENDV?
Return Example: 5.000000e+01
22. PROGram:STEP:TIME
Description: Sets the Step Mode execution time.
Syntax: PROGram:STEP:TIME <Hour><,><Minute><,><Second>
Parameter: Hour : <NR1> 0 ~ 99
Minute : <NR1> 0 ~ 59
Second : <NRf1> 0 ~ 59.99
Example: Changes the time for STEP Mode action to 1 hour 30 min. & 5 sec.
PROGram:STEP:TIME 1,30,5
Query Syntax: PROGram:STEP:TIME?
Return Parameter: <Hour><,><Minute><,><Second>
Query Example: PROGram:STEP:TIME?
Return Example: 1,30,5.000000e+00