Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
When the memory, data, and communication self tests are done, the screen goes to the MAIN
PAGE automatically, as shown below:
V = 0. 0 0_ V I = 0. 0 0 A O F F
0 . 0 0 0 0 V 0 . 0 0 0 0 A
0 . 0 W
Figure 2-16
The DC Power Supply internal circuits may not be able to reset if it is
powered off and on quickly. Wait at least 3 seconds after powering OFF
before powering ON again.
Before turning on the instrument, all protective grounding terminals,
extension cords, and devices must be connected to an earth ground. A
potential electric shock hazard may exist with any incomplete grounding,
resulting in injury to personnel.
To Next Page
Loading...
