168
9600 Mobile Computer
Reference Manual
Select Length
One or two fixed lengths
Range
4~127
Negative Barcode Disable
Plessey Disable
Convert to UK Plessey When applied, each occurrence of the character "A" in the
barcode data will be replaced by the character "X".
No
Transmit Check Digit Decide whether to include the two check digits
in the data
being transmitted.
Yes
Telepen Disable
Original Telepen
(Numeric)
The original Telepen includes numeric characters. Yes
AIM Telepen (Full
ASCII)
AIM Telepen (Full ASCII) includes all the alphanumeric and
special characters.
No
GS1 DataBar-14 (RSS-14) Disable
GS1 DataBar-14 is short for GS1 DataBar Omnidirectional. This group consists of (1) GS1 DataBar
Omnidirectional, (2) GS1 DataBar Truncated, (3) GS1 DataBar Stacked, and (4) GS1 DataBar
Stacked Omnidirectional.
Transmit Code ID
Decide whether to include Code ID (“]e0”) will be included
in the data being transmitted.
Yes
Transmit Application
ID
Decide whether to include the Application ID ("01") in the
data being transmitted.
Yes
Transmit Check Digit Decide whether to include the check digit
in the data being
transmitted.
Yes
GS1 DataBar Limited (RSS Limited) Disable
Transmit Code ID Refer to RSS-14. Yes
Transmit Application
ID
Refer to RSS-14. Yes
Transmit Check Digit Refer to RSS-14. Yes
GS1 DataBar Expanded (RSS Expanded) Disable
This group consists of (1) GS1 DataBar Expanded, and (2) GS1 DataBar Expanded Stacked.
Transmit Code ID Refer to RSS-14. Yes
EAN-8 Enable
Convert to EAN-13 The EAN-8 barcode will be expanded into EAN-13, and the
next processing will follow the settings configured for
EAN-13.
No
Transmit Check Digit Decide whether to include the check digit
in the data being
transmitted.
Yes
Addon 2 / Addon 5 Decide whether to decode EAN-8 with addons. No
EAN-13 / UPC-A Enable
ISBN Conversion The EAN-13 barcode starting with 978 and 979 will be
converted to ISBN.
No
ISSN Conversion The EAN-13 barcode starting with 977 will be converted to
ISSN.
No
To Next Page
Loading...
