5.6.- SETUP MENU 
If the setup menu is protected by an access password there is an icon   on the main menu 
screen, see Figure 112.
Figure 112:Protected setup menu.
A  screen  will  appear  when  accessing  the  menu  to  enter  the  access  password 
(Figure 113). Password enablement is selected in section “5.6.4. Access key.”
Figure 113: Access password screen.
The digit selected is indicated in white.
The following options appear in the lower area:
 
,   ...   The ten possible digits to program.
124
CVM-B100 - CVM-B150
Instruction Manual