Circutor CVM-B100 User Manual

If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen.
5.6.19.- PARAMETER RESET.
The parameters to be reset are selected on the parameter reset screen, Figure 140.
In the CVM-B you can reset:
 The maximum and minimum values.
 The energies.
 The demand values.
 The maximum demand maximum values.
 The energy closes.
 The event and energy logs.
Figure 140: Parameter reset screen.
The following options appear in the lower area:
Enable reset, enable reset of selected parameter.
Disable reset, disable reset of selected parameter.
Previous, selects the previous parameter.
Next, selects the next parameter.
Conrm, conrms and saves in the memory the values programmed on the screen.
Back, returns to the home screen of the setup menu Figure 114.
Main Menu, back to the main menu, Figure 25.
Use the keys
and to select the different options.
To conrm the selection, press the key
.
172
CVM-B100 - CVM-B150
Instruction Manual

Circutor CVM-B100 Specifications

General

Brand	Circutor
Model	CVM-B100
Category	Measuring Instruments
Language	English