Circutor CVM-B100 - 4.6.- INPUTS; 4.7.- OUTPUTS

4.6.- INPUTS
The CVM-B has two programmable digital inputs (terminals 7 and 8 in
Figure 1) for working as:
 Logic input.
 Impulse input.
 Tariff selection.
See “5.6.17.- Digital inputs.” to congure the inputs.
In “5.1.7.- Integrated functions.” and in “5.5.2 Integrated functions.” you can see the status and
conguration of the programmed digital inputs.
The selected tariff can be determined in accordance with the status of the inputs, as shown in
Table 7.
Table 7: Selecting the tariff according to the inputs.
I1 I2
Tariff
Tariff selection Tariff selection
0 0 Tariff 1
0 1 Tariff 2
1 0 Tariff 3
4.7.- OUTPUTS
The unit features:
 Two relay digital outputs (terminals 16, 17, 18 and 19 in
Figure 1) programmable as
alarms, see “5.6.15.-Relay digital outputs.”
 Two transistor digital outputs, optoisolated NPNs (terminals 10, 11 and 12 in
Figure 1) programmable as an impulse output or alarms, see “5.6.16.- Transistor digital
outputs.”
35
Instruction Manual
CVM-B100 - CVM-B150