3.5.- STARTING UP THE UNIT
Once the CVM-B is connected to the power supply, the following screen,
Figure 11, appears on
the display and checks the integrity of the unit and detects the expansion modules.
Figure 11: Initial check screen of the CVM-B.
When the checking process has nished, the welcome screen is displayed (Figure 12) until the
key is pressed to continue with the start-up.
Note: If 20 seconds elapse without pressing the
key, the unit moves directly to the meas-
urement screen by default.
Figure 12: CVM-B welcome screen.
22
CVM-B100 - CVM-B150
Instruction Manual
To Next Page
Loading...
