Circutor CVM-B100 - Access Key

5.6.4.- ACCESS KEY.
The access key to the unit setup menu is selected on this screen Figure 118.
Figure 118: Access key conguration screen.
The digit selected is indicated in white.
The following options appear in the lower area:
, ... The ten possible digits to program.
Previous, selects the previous digit.
Next, selects the next digit.
Conrm, conrms and saves in the memory the value programmed on the screen.
Back, returns to the home screen of the setup menu Figure 114.
Unlock, removes setup menu protection by means of a password.
Main Menu, back to the main menu, Figure 25.
Use the keys
and to select the different options.
To conrm the selection, press the key
.
If the unit is protected with a password and you want to remove that protection, select the
unlock option
and an information screen will appear indicating that you are about to unlock
the unit, and then nally select the conrmation option
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen.
129
Instruction Manual
CVM-B100 - CVM-B150