Circutor CVM-B100 - 5�6�6�- RATIO of Voltage Transformers

5.6.6.- RATIO OF VOLTAGE TRANSFORMERS.
The voltage transformer ratio is selected on this screen, Figure 120.
The following is programmed:
 The value of the primary voltage
 The value of the secondary voltage.
 The value of the rated phase-neutral voltage.
Figure 120: Voltage transformer ratio conguration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
, ... The ten possible digits to program.
Comma, when programming the secondary voltage.
Previous, selects the previous parameter.
Next, selects the next parameter.
Conrm, conrms and saves in the memory the value programmed on the screen.
Delete character, deletes the selected character.
Delete parameter, deletes the characters of the selected parameter.
Back, returns to the home screen of the setup menu Figure 114.
Main Menu, back to the main menu, Figure 25.
Use the keys
and to select the different options.
To conrm the selection, press the key
.
131
Instruction Manual
CVM-B100 - CVM-B150