Circutor CVM-B100 - 8.- SOFTWARE UPDATE

8.- SOFTWARE UPDATE
In the CVM-B you can update:
 The unit software,
 The expansion modules software.
Before carrying out any updating process, the unit must be unplugged from all
power supplies, both the power supply for the unit and measurement.
To update the unit you will need:
 The microSD card inserted on one side of the unit.
 The update les, which can be found on the Circutor web site.
Select the update les according to the model of the unit, CVM-B100 or CVM-B150.
 A PC so as to update the les in the microSD card.
On the side of the unit there is a slot with the microSD card; to access it simply press the
microSD card and it will be released from the slot.
Figure 221: Position of slot with the microSD card.
310
CVM-B100 - CVM-B150
Instruction Manual