Circutor CVM-B100 - Page 189

Table 32: Conguration of local time
Local time parameter
Local time Value Local time Value
UTC+1 0x0000 UTC-11 0x000C
UTC+2 0x0001 UTC-10 0x000D
UTC+3 0x0002 UTC-9 0x000E
UTC+4 0x0003 UTC-8 0x000F
UTC+5 0x0004 UTC-7 0x0010
UTC+6 0x0005 UTC-6 0x0011
UTC+7 0x0006 UTC-5 0x0012
UTC+8 0x0007 UTC-4 0x0013
UTC+9 0x0008 UTC-3 0x0014
UTC+10 0x0009 UTC-2 0x0015
UTC+11 0x000A UTC-1 0x0016
UTC+12 0x000B UTC 0x0017
6.3.7.3.- Language
This parameter occupies 1 register.
Table 33:Modbus memory map: Conguration variables (language).
Language
Configuration variable Address Valid data window Default value
Unit language 2A9C
0: Spanish
1: English
2: German
3: French
4: Chinese
5: Korean
1
6.3.7.4.- Access key
The Enable conguration variable occupies 1 register.
The Value conguration variable occupies 4 registers.
Table 34: Modbus memory map: Conguration variables (Access key).
Access key
Configuration variable Address Valid data window Default value
Enabled 2A97
0: Enabled
1: Disabled
1
Value 2A98-2A9B 0- 9
0x0001 0x0009
0x0007 0x0003
Note: The 5 registers must be written at once (as a group), otherwise it will respond with an
error.
189
Instruction Manual
CVM-B100 - CVM-B150